Module Schematics & Installation Instructions


Our goal at NAMZ is to provide the very best customer service before, during and after the sale. To us, it doesn't matter where you purchase our motorcycle products because our name is on it and we want you to do it right, the first time. With that being said, we wanted to give you the technical support you need, 24-hours a day, 365-days a week. Please find a complete listing of our installation instructions, tech tips and other helpful guides for your motorcycle wiring below.

**NOTE! If you purchased LED's for the FRONT and REAR of your motorcycle and connected any of our LE-03 or ILL-01 Modules and STILL get a rapid flash, please perform a TSM Reset Procedure as follows:

With any Badlands LE-03 or ILL-01 Module and front & rear LED's installed, turn your bikes ignition switch to ON, press the RIGHT turn signal button and allow to flash (2-times) before pressing it again to turn off. Then, perform the same procedure on the left, press the LEFT turn signal button and allow to flash (2-times) before pressing it again to turn off. Then, go back to the right side and press the RIGHT turn signal button and allow to flash (10-times) before pressing it again to turn off. Repeat the same for the left and your TSM should be reset and the rapid flashing should be back to normal.

Badlands Automatic Turn Signal Canceling Module:

Badlands Intensifier HI/LOW Modules:

Badlands Brake Light Eliminator Module:

Badlands Illuminator RUN/BRAKE/TURN Modules:

Badlands Illuminator Isolator Modules:

Badlands Load Equalizer I, II & III Modules:

Badlands CAN/Bus Load EQ's & Illuminator Modules:

Badlands Illuminator PRO-III Module:

Badlands Victory Motorcycle Illuminator Modules:

Badlands METRIC Illuminator PRO-III-M Module:

Badlands METRIC Load Equalizer II Module for Honda Motorcycles ONLY:

Badlands METRIC Load Equalizer IIII Module:

Badlands METRIC Illuminator RUN/BRAKE/TURN Module for CRUSIERS:

Badlands METRIC Illuminator RUN/BRAKE/TURN Module for SPORT BIKES:



We care about our customers. Feel free to contact us with your questions or concerns and someone will respond accordingly. Thank you for your support!

Customer Service
Phone: 610-265-7100
Email: (CONTACT US)

namz website click here!

new! '14 brake removal, ihl-04

new! Trailer isolator/rbt/5-4

follow us on facebook